
-----------------------------------
Nalmeida
Fri 04-01-2013, 22:24

Re: Ajuda!
-----------------------------------
Eu já vi t6config em algum lado, e foi no primeiro rádio que tive, o problema que tens é que o cabo que estás a usar com o radio serve apenas para programar o radio, o windows não o vê como um controlador de jogos.
Resolução passa por instalar um par de programas, entre eles um emulador que serve de interface entre o radio e windows.

So here is short tutorial for everyone: 
If you have one of these radio transmitter 
HobbyKing HK-T6A 
FlySky FS-CT6A 
Turborix TBXT6 
Exceed RC 
Storm ST-06TX 
CopterX CX-CT6A 
Jamara FCX 6 

or B or 2 version 

FIRST thing is check this software. (even if you dont use ClearView) 
Its called DigitalRadiohttp://www.sgr.info/usbradio/download.htm You can try it free and cost very low. 
Dont use T6Config, its garbage. 

So If you want use your transmitter with ClearView, you need to make your transmitter to Windows USB Contoller. You need two things: 
PPJoy and T6sim 
PPJoy will make virtual USB contoller/joystic. You can download it here: (ppjoysetup-0-8-4-6 version or newer) 
http://www.rapidspread.com/file.jsp?id=fskapbelig or http://ppjoy.blogspot.com/ 

T6sim_v1.05 (or newer) can be downloaded here 
http://www.rcgroups.com/forums/showpost.php?p=13740310&postcount=2513 

Now, first Install PPJoy. Its simple task. Only if you have 64Bit Windows its need special mode to run. But its safe. 

Then look info inside T6sim ZIP file. It will tell how add virtual controller with PPJoy. 

You need program your radio transmitter to "Acro" mode. Its easy with DigitalRadio. Then you start T6sim.exe, calibrate your controller in Windows. After your contoller is working corretly in Windows, you can start ClearView.

http://clearviewrc.com/forum/viewtopic.php?t=1196
