
-----------------------------------
neno
Mon 23-07-2007, 14:35

Re: sukhoi xxxxxl
-----------------------------------
Oi pessoal já tenho uma lixadeira e os planos impressos numa ploter, cola para madeira e vontade de trabalhar, ehehe
Desta vez vai ficar tudo certinho e feito com mais calma, vou utilizar cola de secagem rápida para madeira.

O que me dizem disto!:
___________________________________________
2X KB45-08L 2300kv Brushless Inrunner

Kv: 2300RPM/V
Weight: 449g
Shaft: 6mm
Size: 63x45mm
Voltage: 36v
Highest rated power: 3439W
This size motor will fit our larger 5inch and 4.75inch EDF perfectly. (same mounting holes & shaft size)

____________________________________________________________

2X EDF Ducted Fan Unit 7 Blade 4.5inch

Blade Diameter: 4.5inch / 115mm
Outer Case Diameter: 122mm
Wall Thickness: 2mm
EDF Length: 113mm
Blade Type: 7
Shaft Size: 6mm
Made from high strength reinforced plastic.
Spare propellers available.
This fan will take up to a 49mm diameter motor.

Recomended Motor:  36-50 4 Turn (22.2v)
ESC: 100A
Rpm: 1,000kv
Power: 1500~4000g Thrust


___________________________________________________________

HXT D9 4100mAh 5S 15-25C Lipoly Pack

Capacity: 4100mAh (each cell)
Configuration: 5S1P (18.5v)
Discharge: 15-25C (new formular, increased discharge rate)
Total Pack Weight: 545g
Dimentions: 43x132x44mm

____________________________________________________________

Variador XPower 40 amp
Output: Continues 40A, Burst 55A up to 10 Secs.
Input Voltage: 5.6V --- 26.0V ( Lithium : 2 – 5s or NiMH/NiCd  5 -15 Cells)
 :)
